EZ Angle Advantages

Weighing in at under 2 pounds (3 lbs. with case), the EZ Angle is clearly the smart alternative to heavy and cumbersome transit. The EZ Angle comes with a durable case that will endure rough working conditions and heavy handling. EZ Angle easily can be carried to any job site.

Over the years, the primary method of finding angles has been with the use of a tape measure. Even under ideal conditions one can only achieve reasonable accuracy in determining the angle turned. Most of the time ideal conditions are not encountered (trees, brush, briars, slopes, fences, cars, etc.) and accurate measurement is impossible.
Now, with the EZ ANGLE a far more efficient and accurate way of arriving at the angle is achieved. The typical accuracy of this device is plus or minus 1 degree, which is far more accurate than the current taping method used.

If you run across obstructions in the field, you must go back to the office to calculate angles with trig. EZ Angle calculates all angles for you.
Unfortunately, many planners guess at angles. To protect themselves they simply over design. This means the utility is spending more money on heavier guys, anchors and framing than is required.
Most utilities now maintain a mapping database. This is constantly being updated as the "As Built" drawings are sent to mapping. If the angle is wrong on these drawings everything is mapped incorrectly from that point on. A small error results in larger errors further down the line.
EZ Angle will eliminate over design and SAVE YOU MONEY!